Air Cooled Industrial Chiller

Product Description

AC/W industrial water chillers are widely used in industries including the plastics, electronic manufacturing, electroplating, pharmacy, chemical engineering, ultrasonic cooling, and printing.

COPELAND, DAIKIN, PANASONIC, SANYO compressor, SCHNEIDER electronic components, Italian water pump and stainless steel water- tank-type evaporator can be chosen.
Precisely control water temperature with variation of +/- 1º C, and the temperature ranges from 5º C to 50º C.
Energy saving.
Customized units are our specialty.

Model Item		AC-2
nominal cooling Capacity	kcal/h	4541
nominal cooling Capacity	kw	5.28
input power	kw	2.27
power supply	1PH~220V/50HZ
refrigerant	type	R22
refrigerant	type of control	capillary
compressor	type	hermetic rotary
compressor	power(kw)	1.77
condenser	type	finned copper tube + low noise outer rotor fan
condenser	cooling air flow(m 3 /h)	2000
evaporator	type	tank with coil ( shell and tube )
	chilled fluid flow(m 3 /h)	0.908
	Volume(L)	40
	inlet and outlet pipe diameter (inch)	1/2
water pump	power (kw)	0.37
water pump	lift(m)	20
safety protection	compressor over temperature, over current, high and low pressure, over temperature,flow switch, phase sequence, phase-missing, exhaust overheating, antifreezing
weight	Kg	100
dimension	Mm	580550925
Note: 1. Nominal cooling capacity is according to: Inlet chilled fluid temperature: 12 centigrade degree. Outlet chilled fluid temperature: 7 centigrade degree. Inlet cooling air temperature: 30 centigrade degree. Outlet cooling air temperature: 38 centigrade degree. 2. Working range: The temperature range of chilled fluid is from 5 centigrade degree to 35 centigrade degree; Temperature difference between inlet and outlet chilled fluid is from 3 centigrade degree to 8 centigrade degree. It is better to use the chiller while the ambient temperature at or below 35 centigrade degree . We reserve the right to modify the above dimensions or parameters without further notice.